TC-121 Self centering frame gauge Compact 
The TruckCam frame gauge TC-121 Compact is based on a self centering principle and has a range of 455-1820 mm. As all parts like extension bars and reflective targets remains compactly mounted on the frame gauge, the application time of the frame gauge to the truck or bus is reduced to a minimum.
TC-121 Compact product sheet

TC-175 Wheel adapter Spider,
for rims 14" – 24"
The TruckCam wheel adapter TC-175 Spider is designed to fit all rim sizes from 14”-24”. Because of its design and low weight the new Spider wheel adapter fits all type of rims of light and heavy commercial vehicles.
TC-175 Spider product sheet

TC-750 TruckCam Autodata Wheel Alignment and Tyre Information Database
The TruckCam Autodata Wheel Alignment and Tyre Information Database provides wheel alignment specifications of most heavy duty trucks and light commercial vehicles. All data in this database is licensed by Autodata Limited, and recieved directly from each vehicle manufacturer, hence always providing the operator with accurate and up-to-date information.
TC-750 Product sheet

TC-142 Magnetic wheel adapter, adjustable
The TruckCam Wheel Adapter TC-142 is designed to simplify the attachment to the wheel. Especially for aluminum rims, the attachment is unique as the wheel adapter no longer has any contact with the rim but is attached by magnetic force on the wheel nuts. This avoids scratches and damages on the aluminum rims. The wheel adapter legs can easily be shortened or lengthened to fit front as well as rear axles.
TC-142 Product sheet

TC-1026 Chassis extenders
The TruckCam Chassis Extenders are used to extend frames with a short overhang. These extenders enable the operator to hang the frame gauge further in the rear of the chassis. In this way air tanks or other equipment can be bypassed.
TC-1026 Product sheet

TC-101 Bus adapter and TC-111 Minibus adapter
The bus adapter uses a self centring patented technique and the adapters clamp to the body in the front and at the back side of the bus. In this way the centreline of the vehicle is determined and frame gauges are easily hung from these adapters. The adapters are available in two sizes, and can also be used for minivans and mobile homes.
TC-101 and TC-111 Product sheet

TC-410 King Pin and Tow Bar adapter kit
The TruckCam King Pin & Tow Bar adapter is a universal kit which simplifies mounting frame gauges on trailers and draw bar trailers. The adapter can be easily converted into a bumper adapter. This bumper adapter can be mounted in the centre pulling pin of several makes.
TC-410 Product sheet

TC-2010 Inclinometer kit
By use of the TruckCam Inclinometer Kit the TruckCam System will automatically compensate for effects on wheel angle measurements deriving from f ex unflat floors, differences in tyre size/tyre pressure and/or lifting of the front end of the vehicle.
TC-2010 Product sheet

TC-152 Low Friction Plate
The TruckCam Low Friction Plate minimizes the friction between tyre and the floor while adjusting toe. Because of its low weight (7kg) the plates are easy to handle. The plates can bear a weight of 6 tons each.
TC-152 Product sheet